FUTABA  |  Varenummer: FPR614FF-E

Receiver R614FF-E 4CH T4PK, 4PKS FASST-C2

736,00 kr

Lagerstatus:


Afhentning:

Ikke på lager

Levering i morgen - Bestil inden:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling

Beskrivelse

The R614FF-E is designed for use with the Futaba FASST-C2 system transmitter. The FASST system has two (2) operation mode as shown below.

  1. Normal mode/High Speed mode -  The "Normal mode" accepts any type of servos or the peripheral equipment.
  2. The "High Speed mode" - Only accepts the digital servos, including BLS series, and most peripheral equipment such as the brushless ESCs. However, there is a transmitter that cannot correspond, to high speed mode.

Please pay special attention to the information contained within the receiver manual and transmitter's manual in order to have a pleasant R/C experience.

  • Built-in antenna = The R614FF-E receiver is designed to be used only for EP Car models.

R614FF-E Specifications:
  • Compatible with the FASST-C2 system transmitters (T4PK, T4PKS, T4PX & T4PXR)
  • FASST C2 2.4GHz system - At Normal/High speed mode (auto detection)
  • 4-channels
  • Receiving Range: aprox 70 m (if maximum range is needed - use the normal R614FS receiver)
  • Power requirement Rated voltage: 3.7V-7.4V
  • Usable voltage: 3.5-8.4V
  • F/S and Battery F/S function:It is set according to the transmitter used.
  • Battery F/S voltage: Set it with the transmitter arbitrarily.
  • Size: 35.1 x 23.2 x 9.0 mm
  • Weight: 7.6 g

Forsendelse

Vi benytter GLS.
Her er der følgende muligheder:

  • Levering til pakkeshop, fast rate uanset vægt og beløb: 47,00 kr.
  • Levering direkte til kundens adresse: 0-5 kg: 69 kr, 5-99 kg: 89 kr.

Leveringstid: 1 dag.
Der afsendes på bestillingsdagen frem til 17.00. Leveringstiden er gældende for både privat- og erhvervsadresser.

Nem og sikker betaling

Betalingsmetoder

  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling

Dine betalingsoplysninger behandles sikkert. Vi opbevarer ikke kreditkortoplysninger og har ingen adgang til dine kreditkortinformationer.

FUTABA

Receiver R614FF-E 4CH T4PK, 4PKS FASST-C2

736,00 kr
The R614FF-E is designed for use with the Futaba FASST-C2 system transmitter. The FASST system has two (2) operation mode as shown below.

  1. Normal mode/High Speed mode -  The "Normal mode" accepts any type of servos or the peripheral equipment.
  2. The "High Speed mode" - Only accepts the digital servos, including BLS series, and most peripheral equipment such as the brushless ESCs. However, there is a transmitter that cannot correspond, to high speed mode.

Please pay special attention to the information contained within the receiver manual and transmitter's manual in order to have a pleasant R/C experience.

  • Built-in antenna = The R614FF-E receiver is designed to be used only for EP Car models.

R614FF-E Specifications:
  • Compatible with the FASST-C2 system transmitters (T4PK, T4PKS, T4PX & T4PXR)
  • FASST C2 2.4GHz system - At Normal/High speed mode (auto detection)
  • 4-channels
  • Receiving Range: aprox 70 m (if maximum range is needed - use the normal R614FS receiver)
  • Power requirement Rated voltage: 3.7V-7.4V
  • Usable voltage: 3.5-8.4V
  • F/S and Battery F/S function:It is set according to the transmitter used.
  • Battery F/S voltage: Set it with the transmitter arbitrarily.
  • Size: 35.1 x 23.2 x 9.0 mm
  • Weight: 7.6 g
Se produkt
Tilbage til toppen