Pull ring (1)/ fuel tank cap (1)/ engine shut-off clamp (1)/ 3x10 BCS (1)

Traxxas 2577 Screws 3x10mm button head mach

Complete Exo-Carbon Kit, Jato (includes rear & mid-chassis battery covers, receiver cover, dirt guards, suspensio... Read more

Rebuild kit, fuel tank (includes: o-ring, grommets (2), cap spring, hardware)

Traxxas 3147X Fuel Line Silicon 610mm

Traxxas 5282 Screw M3x12mm

Fuel tank (75cc, complete)

Pull ring, fuel tank cap (1)/ engine shut-off clamp (1)

Traxxas 1726 Antenna Tube

Linkage set, throttle & brake (Jato) (includes servo horn, rod guides, brake spring, brake adjustment dial, rods ... Read more

Traxxas 2575 Screws M3x6 button head machin

Traxxas 2743 Set (grub) screws 3mm hardened

Receiver box cover (for chassis top plate)/ battery cover (mid chassis)

Battery cover (mid chassis), Exo-Carbon finish (Jato)

Spring, throttle return (2) (Jato, T-Maxx 2.5R, 3.3)

Traxxas 3932 Screws, 3x6mm flat-head machin

Traxxas 2055 Servo high - torque 5,7kg

Traxxas 2674 Screw 2x6mm roundhead self-tap

Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools

Wiring harness, on-board radio system (includes on/off switch and charge jack) (Jato) Read more

Dirt guards, chassis (left & right)

Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesive foam pad (1)

Traxxas 3935 Body Clips Angled (10)

Chassis top plate

Rubber plugs, charge jack, two-speed adjustment (Jato)

Hanger, metal (for tuned pipe)/ 4x8 BCS (1)/ 3x10 BCS (1)

Traxxas 4897 Grubs screw 4mm 6pcs

Chassis, 7075-T6 aluminum (3mm) (titanium-anodized) (machined, lighter than stock)/ adhesive foam pad (1) Read more

Traxxas 2550 Screw 3x8mm countersunk machin

Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/ 4x18 BCS (2)/ flathead engine mount screws 3x10 (2) Read more

Traxxas 4859 Flathead screw M3x10

Traxxas 2547 Screws, 4x18mm countersunk machine (hex drive) (6)

Dirt Guards, left & right, Exo-Carbon finish (Jato)

Roll hoop/ EZ-Start plug mount

EZ-Start 2 wiring harness (for Jato)

Traxxas 2578 Screws 3x12mm button head mach

Air filter housing/ foam insert/ Jato air filter base (long, straight)/ cable tie (1-each) (TRX 2.5, 2.5R, 3.3) Read more

Air filter inserts, foam (3) (pre-oiled) (TRX 2.5, 2.5R, 3.3)

Receiver cover (chassis top plate), Exo-Carbon finish (Jato)

Mounts, RPM sensor (nitro engines)/ 3x10mm CS with split and flat washers (2)

Read more

Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2) Read more

Traxxas 3155 Cable Ties Medium (6)

Header, exhaust (Jato) (tubular aluminum, clear anodized) (TRX 2.5, 2.5R, 3.3)

Tuned pipe, Resonator, R.O.A.R. legal, blue-anodized (aluminum, single chamber) (fits Jato, N. Rustler, N. 4-Tec, wit... Read more

Tuned pipe, Resonator, R.O.A.R. legal (dual-chamber, enhances mid to high-rpm power) (for Jato, N. Rustler, N. 4-Tec ... Read more

Tuned pipe, Resonator, R.O.A.R. legal (single-chamber, enhances low to mid-rpm power) (for Jato, N. Rustler, N. 4-Tec... Read more

Air filter housing/ foam insert/ Jato air filter base (long, straight)/ cable tie (1-each) (TRX 2.5, 2.5R, 3.3) Read more

Air filter inserts, foam (3) (pre-oiled) (TRX 2.5, 2.5R, 3.3)

Traxxas 3155 Cable Ties Medium (6)

Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX 2.5, 2.5R, 3.3) Read more

Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5) Read more

Traxxas 5250 Needle assembly TRX2.5

Traxxas 5234 Carb. body TRX2.5 & TRX3.3

Traxxas 5242 Dust boot

Traxxas 5240 End cap

Traxxas 5241 Screw, Idle speed

Traxxas 5251 Needle low TRX2.5

Traxxas 5243 Throttle arm TRX2.5

Traxxas 1633 E-clips/ C-rings

Traxxas 4611 Ball bearing 5x11x4mm

Traxxas 1985 Teflon washers 5x8x0,5mm (20)

Clutch bell, (16-tooth)/5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #2728 - ball bearings, 5x8x2.5mm (2) Read more

Clutch bell, (18-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4609 - ball bearings, 5x10x4mm (2)) Read more

Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2) Read more

Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2)) Read more

Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2)) Read more

Clutch shoes (2)/ spring (N. Rustler/N.Sport/N.Stampede)

Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec)

Flywheel nut (TRX 2.5, 2.5R, 3.3)

Flywheel with magnet (35mm)

Flywheel (large, knurled for use with starter boxes)

Cone, split beveled

Traxxas 5223 Ball bearing TRX2.5 set

Traxxas 3232X Glow Plug Super-duty Medium

Head protector, cooling head (1)/3x6mm CCS (5) (TRX 3.3)

Traxxas 2550 Screw 3x8mm countersunk machin

Traxxas 2584 Head screws 3x12mm cap-head ma

Traxxas 5292 Shim set TRX3.3

Piston/sleeve (matched set), wrist pin clips(2) (TRX 3.3)

Traxxas 5291 Wrist pin TRX 3.3

Traxxas 5224 Con rod TRX2.5 TRX3.3

Traxxas 5239 Bolt carb

Traxxas 5225 Crankcase TRX 3.3

Traxxas 6521 Sensor Temp/Voltage TQi Long

Read more

Traxxas 6522 Sensor RPM TQi Short

O-ring, header 12.2x1mm (TRX 2.5, 2.5R, 3.3)

Shaft, starter (TRX 2.5, 2.5R, 3.3)

Traxxas 2554 Screws 3x6mm cap-head machine

Traxxas 5274 Backplate 2.5

Traxxas 5213 O-ring f rearcover 2.5

Traxxas 5288 Crankshaft TRX3.3

Traxxas 5142 Screws 3x15

Header, exhaust (Jato) (tubular aluminum, clear anodized) (TRX 2.5, 2.5R, 3.3)

Traxxas 5252 Carb. complete

Traxxas 2577 Screws 3x10mm button head mach

Traxxas 2579 Screws 3x15mm button head mach

Chassis top plate

Servo mounts, steering (left & right)

Traxxas 2055 Servo high - torque 5,7kg

Traxxas 2575 Screws M3x6 button head machin

Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesive foam pad (1)

Chassis, 7075-T6 aluminum (3mm) (titanium-anodized) (machined, lighter than stock)/ adhesive foam pad (1) Read more

Steering bellcranks/ servo saver/ servo saver spring/ steering support/ 4x7x2.5 PB (4)/ 5x0.8mm NL (1) Read more

Bellcrank bushings (plastic) (4x7x2.5mm) (4)

Traxxas 3937 Screw 4x12mm button hea

Servo horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends (2)/ hollow balls (2) Read more

Traxxas 2535 Screws 4x10 countersunk (6)

Turnbuckles, toe-links, 61mm (front or rear) (2) (assembled with rod ends and hollow balls) Read more

Turnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and ... Read more

Bumper, front

Rod ends (12)/ hollow balls (12)

Traxxas 3940 Screw insex M4x4mm round head(6)

Suspension pin set, complete (hardened steel, front & rear), 3x27mm (4), 3x35mm (2), 3x52mm (4) Read more

Caster blocks, 30-degree (left & right)/ steering blocks, 30-degree (left & right) Read more

Caster blocks, 25-degree (left & right)/ steering blocks, 25-degree (left & right) Read more

Steering blocks, titanium-anodized 6061-T6 aluminum (left & right) (For use with 25 and 30-degree caster blocks) Read more

Traxxas 2583 Screws 3x18mm (6)

Caster blocks, 30-degree, titanium-anodized 6061-T6 aluminum (left & right)

Caster blocks, 25-degree, titanium-anodized 6061-T6 aluminum (left & right)

Wheel spindles, front (left & right) (2)

Wheel spindles, front, 7075-T6 aluminum, blue-anodized (left & right)

Suspension arms, front (left & right)

Suspension arms, front (left & right), Exo-Carbon finish (Jato)

Complete Exo-Carbon Kit, Jato (includes rear & mid-chassis battery covers, receiver cover, dirt guards, suspensio... Read more

Turnbuckle, aluminum (red-anodized), camber link, 58mm (1) (assembled with rod ends and hollow balls) (see part 5539X... Read more

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Drag link, machined 6061-T6 aluminum (blue-anodized)/ 5x8x2.5 ball bearing (2)

Bellcrank posts (steering)(2)

Bulkheads, front (upper & lower)

Tie bars (front & rear)

Sway bar kit (front and rear) (includes sway bars and linkage)

Sway bars (front) (includes soft, medium, hard)

Traxxas 2553 Screw 3x15mm countersunk machi

Bumper (front), Exo-Carbon finish (Jato)

Traxxas 5116 Ball bearing 5x11x4mm Blue Rubber Sealed (2)

Wheels, All-Star 2.8' (chrome) (nitro front) (2)

Wheels, All-Star 2.8' (black chrome) (nitro front) (2)

Wheels, Twin-Spoke 2.8' (chrome) (nitro front) (2)

Spacers, steel (JatoTwin-Spoke wheels, front) (4)

Traxxas 1747 Lock Nut M4 (10)

Traxxas 1747R Lock Nut Aluminium Flanged M4 Blue (4)

Tires & wheels, assembled, glued (All-Star chrome wheels, Anaconda tires, foam inserts) (nitro front) (1 left, 1 right) Read more

Tires & wheels, assembled, glued (All-Star black chrome wheels, Anaconda tires, foam inserts) (nitro rear/ electr... Read more

Tires & wheels, assembled, glued (Twin-Spoke wheels, Victory tires, foam inserts) (nitro front) (2) Read more

Tires, Anaconda 2.8' (2)/ foam inserts (2)

Tires, ribbed 2.8' (2)/ foam inserts (2)

Tires, Victory 2.8' (front) (2)/ foam inserts (2)

Shocks, GTR composite (assembled) (2) (without springs)

Shocks, GTR aluminum (assembled) (2) (without springs)

Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/o springs) (4) Read more

Shocks, GTR aluminum, red-anodized (fully assembled w/o springs) (4)

Shocks, GTR aluminum, blue-anodized (fully assembled w/o springs) (4)

Shock tower, front

Traxxas 1834 Body Clips Standard Traxxas (12)

Body mount, front

Half shafts, center front (internal splined (1)/ external splined (1)/ center rear (internal splined (1)/ external sp... Read more

Rebuild kit, GTR composite shocks (x-rings, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks Read more

Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower reta... Read more

Spring, shock (white) (GTR) (std. front) (1.1 rate green) (1 pair)

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Shaft, GTR shock (2) (stainless)

Shaft, GTR shock, TiN-coated (2)

Spring, shock (white) (GTR) (front 0.7 yellow) (1 pair)

Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)

Spring, shock (white) (GTR) (rear) (1.0 rate tan) (1 pair)

Spring, shock (white) (GTR) (rear) (1.2 rate silver) (1 pair)

Spring, shock (white) (GTR) (front) (1.3 rate gold) (1 pair)

Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)

Body, GTR shock (aluminum) (1)

Body, GTR shock (hard-anodized, PTFE-coated aluminum) (1)

Wheelie bar/ rear skid (assembled) (fits Jato, requires 5515X for installation)

Wheels (4)/ Axles (2), for Maxx wheelie bar

Traxxas 5185 Rubber (Fits tires for Wheelie Bar (2 pcs) Passer på Wheelie bar til diverse Traxxas-modeller.

Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2) Read more

Traxxas 2579 Screws 3x15mm button head mach

Suspension pin set, complete (hardened steel, front & rear), 3x27mm (4), 3x35mm (2), 3x52mm (4) Read more

Traxxas 3940 Screw insex M4x4mm round head(6)

Carriers, stub axle (rear) (left & right)

Carriers, stub axle, (rear) 6061-T6 aluminum (titanium-anodized)

Traxxas 1985 Teflon washers 5x8x0,5mm (20)

Wheel hubs, hex (2)/ stub axle pins (2)

Traxxas 5116 Ball bearing 5x11x4mm Blue Rubber Sealed (2)

Tires & wheels, assembled, glued (All-Star chrome wheels, Anaconda tires, foam inserts) (nitro rear/ electric fro... Read more

Tires & wheels, assembled, glued (All-Star black chrome wheels, Anaconda tires, foam inserts) (nitro rear/ electric f... Read more

Tires & wheels, assembled, glued (Twin-Spoke wheels, Victory tires, foam inserts) (nitro rear) (2) Read more

Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(4)

Suspension Arms Rear (Par)

Suspension arms, rear (left & right), Exo-Carbon finish (Jato)

Complete Exo-Carbon Kit, Jato (includes rear & mid-chassis battery covers, receiver cover, dirt guards, suspensio... Read more

Spacers, stub axle carrier (rear)

Traxxas 1747 Lock Nut M4 (10)

Traxxas 1747R Lock Nut Aluminium Flanged M4 Blue (4)

Traxxas 2550 Screw 3x8mm countersunk machin

Traxxas 2553 Screw 3x15mm countersunk machi

Traxxas 2583 Screws 3x18mm (6)

Traxxas 2754 Stub Axle Pins (4)

Traxxas 5119 Ball bearing 10x15x4 blue pair

Rod ends (12)/ hollow balls (12)

Driveshaft assembly (1), left or right (fully assembled, ready to install)/ M3/12.5mm yoke pin (1) Read more

Driveshafts, Jato (steel constant-velocity) (assembled with inner and outer dust boots) (1 pair) Read more

Differential output yokes (2)/yoke pins M3/12.5 (2)

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Turnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and ... Read more

Turnbuckle, aluminum (red-anodized), camber link, 58mm (1) (assembled with rod ends and hollow balls) (see part 5539X... Read more

Sway bar kit (front and rear) (includes sway bars and linkage)

Sway bars (rear) (includes soft, medium, hard)

Tires, Anaconda 2.8' (2)/ foam inserts (2)

Tires, Alias 2.8' (2)/ foam inserts (2)

Tires, Victory 2.8' (rear) (2)/ foam inserts (2)

Wheels, All-Star 2.8' (chrome) (nitro rear/ electric front) (2)

Wheels, All-Star 2.8' (black chrome) (nitro rear/ electric front) (2)

Wheels, Twin-Spoke 2.8' (chrome) (nitro rear/ electric front) (2)

Traxxas 3937 Screw 4x12mm button hea

Shock tower, rear

Shocks, GTR composite (assembled) (2) (without springs)

Shocks, GTR aluminum (assembled) (2) (without springs)

Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/o springs) (4) Read more

Shocks, GTR aluminum, red-anodized (fully assembled w/o springs) (4)

Shocks, GTR aluminum, blue-anodized (fully assembled w/o springs) (4)

Stub axles, (rear) (2)

Half shaft set, left or right (internal splined half shaft/ external splined half shaft/ rubber boot/ metal U-joints)... Read more

Traxxas 5559 Suspension Pin Mounts 1.5/ 2.25/ 3.0/ 3.75 Degree Jato

Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesive foam pad (1)

Chassis, 7075-T6 aluminum (3mm) (titanium-anodized) (machined, lighter than stock)/ adhesive foam pad (1) Read more

Control box battery cover w/ belt clip (EZ-Start 2)

Motor/ pinion gear/ motor bushing (EZ-Start 2)

Traxxas 2578 Screws 3x12mm button head mach

Traxxas 5169 Screw 2,6x8mm counters.

Traxxas 3982 Teflon washer 6x8x0,5 (10)

EZ-Start 2 wiring harness (for Jato)

Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5, 2.5R, 3.3)

Gear set (complete) (EZ-Start 2)

Cush-drive elements (4) (EZ-Start 2)

Traxxas 2580 Screws 3x20mm button head mach

Housing set (inner, outer)/ 3x12mmBCS (5)/ 3x20BCS (1)/ motor bushing (EZ-Start 2)

Traxxas 5282 Screw M3x12mm

Lead wire, glow plug (blue) (EZ-Start and EZ-Start 2)/ molex pin extractor (use where glow plug wire does not have bu... Read more

Control box (complete) (EZ-Start 2)

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) Read more

Traxxas 2554 Screws 3x6mm cap-head machine

Traxxas 5116 Ball bearing 5x11x4mm Blue Rubber Sealed (2)

Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch)

Slipper pressure plate & hub (aluminum alloy)

Traxxas 2577 Screws 3x10mm button head mach

Traxxas 5592 Clutch Guard Jato

Brake cam lever/ linkage rod/ bellcrank/ 4mm ball screw (1)/ 4mm ball cup (1)/ 3.0NL (1)/ 3X10 SS (1) Read more

Traxxas 3967 Shoulder screw M3x10 (6)

Bellcrank bushings (plastic) (5x8x2.5mm) (4)

Traxxas 5588 Brake Cam Jato

Rubber plugs, charge jack, two-speed adjustment (Jato)

Gearbox halves (right & left)

Differential output yokes (2)/yoke pins M3/12.5 (2)

Gears, differential 38-T (1)/ differential drive gear 20-T/ side cover plate (1)/ gasket (1)/ output gear seals (x-ri... Read more

Gaskets, differential/transmission

Traxxas 5119 Ball bearing 10x15x4 blue pair

Primary clutch assembly (two-speed shift hub)

Gear set, two-speed (2nd speed gear, 29T/ input gear, 17T steel)

Input shaft (slipper shaft)/ slipper shaft spacer

Traxxas 2754 Stub Axle Pins (4)

Gear, 1st speed 32T/ input gear 14T

Primary shaft/ 1st speed hub/one-way bearing/ snap ring/ 5x8x0.5 TW

Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft)

Traxxas 2524 Screws, 2.5x8 countersunk machine (hex drive) (6)

Traxxas 1985 Teflon washers 5x8x0,5mm (20)

Brake pads (2)/ brake disc hub/ 3X15 CS (partially threaded) (2)/2mm pin (1)/ 4mm e-clip (1) Read more

Brake disc (semi-metallic material)

Traxxas 1633 E-clips/ C-rings

Battery Box, bumper (rear) (includes battery case with bosses for wheelie bar, cover, and foam pad) Read more

Bumper, rear (for use with mid-mounted RX battery)

Traxxas 2558 Screws 3x6mm roundhead machine

Tie bars (front & rear)

Traxxas 2579 Screws 3x15mm button head mach

Battery Box Cover, bumper (rear), Exo-Carbon finish (Jato)

Complete Exo-Carbon Kit, Jato (includes rear & mid-chassis battery covers, receiver cover, dirt guards, suspensio... Read more

Traxxas 3229 Screw M2.5x10mm

Battery holder, 4-cell (no on/off switch) (for Jato and others that use a male Futaba style connector) Read more

Traxxas 2575 Screws M3x6 button head machin

Traxxas 2745 Nuts 3mm nylon locking (12)