{"product_id":"futaba-fp05102763-3-gyro-gya483-6-axis","title":"Gyro GYA483 6-Axis","description":"\u003cstrong\u003eProduct Info:\u003c\/strong\u003e\u003cbr\u003eFutaba GYA483 - An ultra-compact 6-axis gyroscope for aircraft. The essence of the popular GYA573 has been packed into a size equivalent to the small 1-axis gyroscopes GYA450\/451.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGYA483 Specs:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e6-axis gyro for airplanes (compatible with electric and engine-powered aircraft)\u003c\/li\u003e\n\u003cli\u003eDimensions Weight: 20.7 x 20.7 x 11.0 mm \/ 3.7 g\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 3.8V to 8.4V\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: 30mA\u003c\/li\u003e\n\u003cli\u003eSwitching between 1-axis\/2-axis\/3-axis operation modes\u003c\/li\u003e\n\u003cli\u003eOutput channel settings for each operating mode\u003c\/li\u003e\n\u003cli\u003e* For use with the GYA483, we recommend a transmitter with 10 or more channels and an S.BUS compatible receiver.\u003c\/li\u003e\n\u003cli\u003e* The GYA483's 3-axis mode uses S.BUS output. An S.BUS servo or an S.BUS signal converter such as SBD-1\/2 or DLPH-2\/3 is required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cstrong\u003eGYA483 Functions\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEquipped with 3-axis angular velocity and acceleration sensors.\u003c\/li\u003e\n\u003cli\u003eThe aircraft can be mounted in one of six directions.\u003c\/li\u003e\n\u003cli\u003eSwitching between 1-axis\/2-axis\/3-axis operation modes\u003c\/li\u003e\n\u003cli\u003eIn single-axis mode, you can select AIL\/ELE\/RUD.\u003c\/li\u003e\n\u003cli\u003eIn 1-axis mode, normal channel input is possible for the control channel and the gyro gain channel (operates in the same way as GYA450\/451).\u003c\/li\u003e\n\u003cli\u003eWhen connected via S.BUS in single-axis mode, it supports dual ailerons, dual elevators, and twin rudders (operates in a manner equivalent to GYA450\/451).\u003c\/li\u003e\n\u003cli\u003e2-axis and 3-axis modes are S.BUS input only.\u003c\/li\u003e\n\u003cli\u003eIn 2-axis mode, you can select the output channel combinations of AIL\/ELE, ELE\/RUD, and AIL\/RUD.\u003c\/li\u003e\n\u003cli\u003e2-axis and 3-axis modes support elevon (delta wing) and V-tail.\u003c\/li\u003e\n\u003cli\u003e3-axis mode is S.BUS output only (requires S.BUS servo or S.BUS decoder equipment)\u003c\/li\u003e\n\u003cli\u003eIn 3-axis mode, you can select between S.BUS output and the normal CH3 (THR) output.\u003c\/li\u003e\n\u003cli\u003e3-axis mode allows for gyro control of 3rd AIL (AIL3) and 4th AIL (AIL4).\u003c\/li\u003e\n\u003cli\u003eGyro gain can be set from the transmitter (remote gain setting)\u003c\/li\u003e\n\u003cli\u003eAuto-recovery mode that automatically returns the device to a horizontal position if it loses its orientation.\u003c\/li\u003e\n\u003cli\u003eFive operating modes—AVCS\/Normal\/Gyro Off\/Auto Recovery\/Roll Flat—can be switched via the transmitter.\u003c\/li\u003e\n\u003cli\u003e4D flight compatible ( Please refer to the 4D pack page for settings)\u003c\/li\u003e\n\u003cli\u003eThe 3-axis mode, when used in combination with the DLPH-2 , allows for the reliable operation of large machines that require robust power lines.\u003c\/li\u003e\n\u003cli\u003eBasic settings such as operating mode and gyro\/reverse can be adjusted using the buttons and LED indicator on the unit.\u003c\/li\u003e\n\u003cli\u003eThe complex initial setup can be easily performed from the transmitter. (Compatible transmitters: T32MZ\/WC, T26SZ, T16IZS)\u003c\/li\u003e\n\u003cli\u003eAir brake mixing (AIL\/AIL2\/AIL3\/AIL4\/ELE\/EL2) settings are available.\u003c\/li\u003e\n\u003cli\u003e　* Do not use simultaneously with the transmitter's air brake mixing function.\u003c\/li\u003e\n\u003cli\u003e　* Even if you set the same rate as the transmitter's air brake mixing, the actual servo movement will differ.\u003c\/li\u003e\n\u003cli\u003eCamber mixing settings (AIL\/AIL2\/AIL3\/AIL4\/ELE\/EL2) are available.\u003c\/li\u003e\n\u003cli\u003e　* Do not use simultaneously with the transmitter's camber mixing function.\u003c\/li\u003e\n\u003cli\u003e　* Even if you set the same rate as the transmitter's camber mixing, the actual servo movement will differ.\u003c\/li\u003e\n\u003cli\u003eSupports S.BUS input\/output for FASSTest 26CH\u003c\/li\u003e\n\u003cli\u003eRoll and flat function\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003eIf the aileron stick is set to neutral, the roll angle will be maintained horizontally within the specified conditions (*Note 1). This allows you to concentrate on elevator and throttle control during landing, reducing anxiety during landing. It can also be used to practice horizontal attitude during high-altitude flight.\u003cbr\u003e\u003cul\u003e\u003cli\u003e*\u003cstrong\u003eNote 1\u003c\/strong\u003e: The pitch angle (elevator direction) is within ±60 degrees and the roll angle is within a specified range.\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\u003cstrong\u003eImportant points to note when selecting a servo:\u003c\/strong\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFor the GYA483, please use our S.BUS2 compatible servos.\u003c\/li\u003e\n\u003cli\u003eServos that only support S.BUS and those that do not support S.BUS\/S.BUS2 cannot be used with S.BUS output in 3-axis mode.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":43930702118990,"sku":"FP05102763-3","price":665.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/9672\/2510\/files\/FP05102763-3_S.jpg?v=1783289930","url":"https:\/\/fjernstyret.dk\/products\/futaba-fp05102763-3-gyro-gya483-6-axis","provider":"FjernstyretDK","version":"1.0","type":"link"}