HD-1810MG - digital servo m. metalgear

Produkt navn: digital servo HD-1810MG

Specielt:

En meget præcis digital servo. Velegnet til skala .30 helikoptere, fly under 2m og "parkflyvers". Kan f.eks. erstatte Corona MG 12g, HS-65mg m.fl.

Gearene er kompatible med f.eks. JR servohorn.

Servoen deler mål med f.eks. TRX2065 - servo, og kan derfor erstatte mange servoer i Traxxas-biler. F.eks. LaTrax Teton m.fl.
OBS: Servoen passer ikke i Summit 1/10

Kunderne har sagt:
This little servo is super...
I stripped out a weaker rudder servo and changed it out with this small and light powerhouse. I could not believe the strength of this servo it saved my plane while doing knife edge. This is one fantastic servo.

Rocks!...
I'm running these servos in a 35" Wild Wing. The power setup draws 32amps @ 344 watts. It approaches 90mph level and over 100 in a dive. These guys hold up to high rate loops after 100 mph dive...
To say the very least I'm very happy with them. This servo rocks!!!! The gears are super smooth and don't bind at all. No chatter at all. Precision centering, Smooth stepping, and pretty light weight... No overheating

This is good servo...
This is good servo with nice look and good quality.
It’s very strong and not loud. There is no buzzing and the center position is OK.
I’m using it in 2m glider for rudder and elevator and I’m very satisfied. Over all, its gut servo and I recommend it.

Impressive servo for the money...
Measured about 2A peak current when slewing with no mechanical load. No Shoot thru issues. Seeing a little bit of overshoot, but final position is pretty repeatable.
I compared this servo to the DS-929. It is much better than the Corona DS-929MG which has shoot thru current issues of 5A for 13usec with normal leads and BEC. When I added a 470uF cap at the servo connector, the peak draw went up to 6A for 1.5us

Excellent powerfull precise servo....
Very small, smooth gears, no chatter. Good for larger models also. Highly recommended, Great price.

Excellent little servo...
OK Quality, powerfull, accurate, Quiet, no slop. Good for many different size planes. Will stand up to abuse without stripping gears. How can you go wrong. 5 stars.

Great for wing sweep...
I'm using it for the MDC F-14 swing wing operation and it works great!

Very good servo !...
Pure construction and good performance !
In real it looks better than in picture.

Good!...
good servo good price good explosive.... results!

Still works perfect!...
After several hard 3D flights works all four OK.

Great Servo at great price...
I am using them on my Mini Titan and they last longer then those branded servo with double or triple selling price. Sustain many crash from my lousy flying skill too.. :)

My most favorite mini servo...
It's a bit larger that the HS-55's. I can verify the 16gm weight. Servo is really strong and has good holding power. Resolution is smooth with no jittering. Servo has 5 metal and 4 resin gears. Output spline is resin.

Tested...
Tested on my friends Electrifly Edge 540T and the work like a charm.

Very strong...
I use in on my black-hawk 6 (360mm main blade)
very strong and not crashed, and good price ^^