1 4
FSDK  |  Varenummer: HD-9150MG

HD-9150MG - digital servo, hurtig og stærk! metalgear!

279,00 kr

Lagerstatus:


Afhentning:

Ikke på lager

Levering i morgen - Bestil inden:

Dag-til-dag levering

Dag-til-dag levering
  • Visa
  • Mastercard
  • MobilePay

Beskrivelse

Produkt navn: digital servo HD-9150MG
Model nummer: HD-9150MG
Specifikationer:
* Volt: 4.5v~7.2v
* Hastighed: .17sec
* Torque: 15.8kg/cm
* Bearings: 2BB
* Gear: Metal
* Vægt: 60g
* Størrelse: 40x20x37mm
 

Specielt:

Stærk og hurtig servo - specielt god til fjernstyrede biler og fly hvor respons/hastighed og trækkraft/torque er vigtig.

Gearene er kompatible med f.eks. JR servohorn.
 

Kunderne har sagt:
Thats a very good servo....5 stjerner
In my 2.6m Krill Katana, I´ve used the DS9900 Dymond servo directly at 7.4V. Unfortunately, the elevators began to shimmy despite the strong servo. I exchanged the elevator servos with this 15.8kg servo. And, all I can say is that this was the solution of the problem. It has enough power for a 2.6m Acro-Plane. Fast and centers very good. I can recommend this servo for bigger planes. You don´t have to buy expencive Hitec ones.
Good servo...5 stjerner
good servo, works really good in my 1:8 buggy, used it for steering, really strong
i strongly recommend this servo, especially for this price
Precise and strong...5 stjerner
Very accurate and good torque. But it was a bit higher then expected.
digital metal gear servo 60g/1...5 stjerner
Good servo. Quick and very precise. Servo very robust ideal for airplanes of great scale
Had to give it a try...5 stjerner
It's a good bit deeper (taller) than a standard size but not too much. The gears are stout and the innards are well laid out with pretty good support. There's very little slop and while there is a bit of over-shoot when the when the servo makes a high speed return to center, it's not bad and the centering is quite good. For the price, it's a great high strength servo!
Great Servos...5 stjerner
I bought 7 of these servos for my large scale Piper Pawnee...absolutely fantastic - you can't beat the cost/quality ratio. Will buy again for my next big plane!
digital metal gear servo...5 stjerner
Verry well made servo and verry strong, too bad they where sold out at this time, I would have bought more of these.
HG-9150MG servo...5 stjerner
I am using one of these for rudder in my 50cc YAK54. Unsurpassed value for money. Centers perfectly every time, fast, powerful, so, what more do you want?? Compared to other MUCH more expensive brands (H*tec, H*per*ion, J*, etc) that I have used before, this will certainly be my future servos to use for all applications in my 50cc models.
The HG servos are good quality, so the other brands should take notice that there are "cheaper" brands such as HG, with quality that exceeds theirs. 
Strong...5 stjerner
this servo is very strong, very fast, not heavy, nice for 33% gass plane. Good choise
digital metal gear servo...5 stjerner
Very good servo and cheap.
Awsome servos...5 stjerner
Just installed an flew in a 50cc DA 50 powered AW 260. Perfect centering, faster then expected and no gear slop. Handled extreame 3D with ease!! HIGHLY RECOMMEND!!
Digital metal gear servo...5 stjerner
Very high quality servo. All gears is metal! Servo cable is very thick and 300mm long.
Servo ...5 stjerner
I'm using thins servo in a 196cm CMPro extra 330 for the rudder. Now it had much more deflection then with the 10.6kg servo that I used before.
It's quite fast and strong.
Truck 1/8...5 stjerner
I can recommend this servo for truck 1/8 ,strongly recommend this servo, especially for this price Very strong and very fast.
HD9150...5 stjerner
Outstanding performance for this price.

Forsendelse

Vi benytter GLS.
Her er der følgende muligheder:

  • Levering til pakkeshop, fast rate uanset vægt og beløb: 47,00 kr.
  • Levering direkte til kundens adresse: 0-5 kg: 69 kr, 5-99 kg: 89 kr.

Leveringstid: 1 dag.
Der afsendes på bestillingsdagen frem til 17.00. Leveringstiden er gældende for både privat- og erhvervsadresser.

Nem og sikker betaling

Betalingsmetoder

  • Visa
  • Mastercard
  • MobilePay

Dine betalingsoplysninger behandles sikkert. Vi opbevarer ikke kreditkortoplysninger og har ingen adgang til dine kreditkortinformationer.

HD-9150MG - digital servo, hurtig og stærk!
FSDK

HD-9150MG - digital servo, hurtig og stærk! metalgear!

279,00 kr
Produkt navn: digital servo HD-9150MG
Model nummer: HD-9150MG
Specifikationer:
* Volt: 4.5v~7.2v
* Hastighed: .17sec
* Torque: 15.8kg/cm
* Bearings: 2BB
* Gear: Metal
* Vægt: 60g
* Størrelse: 40x20x37mm
 

Specielt:

Stærk og hurtig servo - specielt god til fjernstyrede biler og fly hvor respons/hastighed og trækkraft/torque er vigtig.

Gearene er kompatible med f.eks. JR servohorn.
 

Kunderne har sagt:
Thats a very good servo....5 stjerner
In my 2.6m Krill Katana, I´ve used the DS9900 Dymond servo directly at 7.4V. Unfortunately, the elevators began to shimmy despite the strong servo. I exchanged the elevator servos with this 15.8kg servo. And, all I can say is that this was the solution of the problem. It has enough power for a 2.6m Acro-Plane. Fast and centers very good. I can recommend this servo for bigger planes. You don´t have to buy expencive Hitec ones.
Good servo...5 stjerner
good servo, works really good in my 1:8 buggy, used it for steering, really strong
i strongly recommend this servo, especially for this price
Precise and strong...5 stjerner
Very accurate and good torque. But it was a bit higher then expected.
digital metal gear servo 60g/1...5 stjerner
Good servo. Quick and very precise. Servo very robust ideal for airplanes of great scale
Had to give it a try...5 stjerner
It's a good bit deeper (taller) than a standard size but not too much. The gears are stout and the innards are well laid out with pretty good support. There's very little slop and while there is a bit of over-shoot when the when the servo makes a high speed return to center, it's not bad and the centering is quite good. For the price, it's a great high strength servo!
Great Servos...5 stjerner
I bought 7 of these servos for my large scale Piper Pawnee...absolutely fantastic - you can't beat the cost/quality ratio. Will buy again for my next big plane!
digital metal gear servo...5 stjerner
Verry well made servo and verry strong, too bad they where sold out at this time, I would have bought more of these.
HG-9150MG servo...5 stjerner
I am using one of these for rudder in my 50cc YAK54. Unsurpassed value for money. Centers perfectly every time, fast, powerful, so, what more do you want?? Compared to other MUCH more expensive brands (H*tec, H*per*ion, J*, etc) that I have used before, this will certainly be my future servos to use for all applications in my 50cc models.
The HG servos are good quality, so the other brands should take notice that there are "cheaper" brands such as HG, with quality that exceeds theirs. 
Strong...5 stjerner
this servo is very strong, very fast, not heavy, nice for 33% gass plane. Good choise
digital metal gear servo...5 stjerner
Very good servo and cheap.
Awsome servos...5 stjerner
Just installed an flew in a 50cc DA 50 powered AW 260. Perfect centering, faster then expected and no gear slop. Handled extreame 3D with ease!! HIGHLY RECOMMEND!!
Digital metal gear servo...5 stjerner
Very high quality servo. All gears is metal! Servo cable is very thick and 300mm long.
Servo ...5 stjerner
I'm using thins servo in a 196cm CMPro extra 330 for the rudder. Now it had much more deflection then with the 10.6kg servo that I used before.
It's quite fast and strong.
Truck 1/8...5 stjerner
I can recommend this servo for truck 1/8 ,strongly recommend this servo, especially for this price Very strong and very fast.
HD9150...5 stjerner
Outstanding performance for this price.
Se produkt
Tilbage til toppen