Bittydesign  |  Varenummer: BDRW-190STK Producent varenr.: BDRW-190STK  |  EAN: 612292983819

Bittydesign BDRW-190STK - Rear Hard wing for Stock-Racing

54,00 kr

Få prismatch på Bittydesign BDRW-190STK - Rear Hard wing for Stock-Racing

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil før kl. 12:15, leveret om 4-6 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Bittydesign Rear Hard wing 190mm - Stock spec [Universal]

The STOCK Rear wing is made with 0.75 mm thickness polycarbonate and it's an universal accessory that fit all the 1/10 190 mm TC bodies on the market. The 3D cad design ensure a top quality accessory that we developed to meet the needs of the Stock class, the downforce angle as well as the centre rounded area are done to maximize the performance but at same time to keep the correct rotation and fluidity necessary for this category.

Compared with the wing that is usually supplied with the Light Weight bodies, using the hard wing increase the downforce stabilizing the rear of the model making it easier and more confident to drive.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

Bittydesign

Bittydesign BDRW-190STK - Rear Hard wing for Stock-Racing

54,00 kr

Bittydesign Rear Hard wing 190mm - Stock spec [Universal]

The STOCK Rear wing is made with 0.75 mm thickness polycarbonate and it's an universal accessory that fit all the 1/10 190 mm TC bodies on the market. The 3D cad design ensure a top quality accessory that we developed to meet the needs of the Stock class, the downforce angle as well as the centre rounded area are done to maximize the performance but at same time to keep the correct rotation and fluidity necessary for this category.

Compared with the wing that is usually supplied with the Light Weight bodies, using the hard wing increase the downforce stabilizing the rear of the model making it easier and more confident to drive.
Se produkt
Tilbage til toppen