DELUXE MATERIALS  |  Varenummer: DL-BD69 Producent varenr.: BD69  |  EAN: 5060243901774

Milled Glass Fibre 50gr

79,00 kr

Få prismatch på Milled Glass Fibre 50gr

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 4-6 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Deluxe Materials BD69 - Milled Fibre Glass Fibres 50g

Milled fibres are simply stirred into epoxy and polyester resins to thicken and improve their toughness, flexural strength, crack resistance and dimensional stability.

They can also be used with thin cyanoacrylate by simply adding a couple of drops of thin penetrating ca (e.g. Roket Hot) to the Milled Fibre which will produce an extremely adhesive, hard & tough material.

This 2-part, fast- curing, epoxy putty will not shrink or crack and is pre-measured and packed for accurate mixing of the two parts. It sets in 10-15 minutes to a tough, lightweight plastic and unlike many other putties it is easy to sand, carve & paint once set.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

DELUXE MATERIALS

Milled Glass Fibre 50gr

79,00 kr

Deluxe Materials BD69 - Milled Fibre Glass Fibres 50g

Milled fibres are simply stirred into epoxy and polyester resins to thicken and improve their toughness, flexural strength, crack resistance and dimensional stability.

They can also be used with thin cyanoacrylate by simply adding a couple of drops of thin penetrating ca (e.g. Roket Hot) to the Milled Fibre which will produce an extremely adhesive, hard & tough material.

This 2-part, fast- curing, epoxy putty will not shrink or crack and is pre-measured and packed for accurate mixing of the two parts. It sets in 10-15 minutes to a tough, lightweight plastic and unlike many other putties it is easy to sand, carve & paint once set.
Se produkt
Tilbage til toppen