HPI Racing  |  Varenummer: HP-160940 Producent varenr.: HP160940  |  EAN: 5050864035477

FLX10-3660-3700KV BRUSHLESS MOTOR

348,00 kr

Få prismatch på FLX10-3660-3700KV BRUSHLESS MOTOR

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.


Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 8-10 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering

  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
    Se butiksoplysninger

Beskrivelse

For maximum power in your 1/10th scale on- or off-road vehicle, you need a powerful and versatile motor! This 3700KV motor has loads of power, enough for big air, huge top speeds, and wheel-spinning, grin-inducing sideways stunts!

The FLX10-3660-3700 is great for all kinds of 1/10th scale vehicles: 

buggies
touring cars
scalers
drifters
Mini racers
crawlers
desert buggies
vintage touring cars
stadium trucks
short course trucks
desert trucks
3700kV Sensorless Brushless 4-Pole 1/10th Scale Motor
5mm Shaft
4mm bullet connectors

Use the awesome #160942 FLX-10 3S802 Flux ESC with XT-60 for complete control and versatility!

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when underwater. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts. 

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

FLX10-3660-3700KV BRUSHLESS MOTOR
HPI Racing

FLX10-3660-3700KV BRUSHLESS MOTOR

348,00 kr

For maximum power in your 1/10th scale on- or off-road vehicle, you need a powerful and versatile motor! This 3700KV motor has loads of power, enough for big air, huge top speeds, and wheel-spinning, grin-inducing sideways stunts!

The FLX10-3660-3700 is great for all kinds of 1/10th scale vehicles: 

buggies
touring cars
scalers
drifters
Mini racers
crawlers
desert buggies
vintage touring cars
stadium trucks
short course trucks
desert trucks
3700kV Sensorless Brushless 4-Pole 1/10th Scale Motor
5mm Shaft
4mm bullet connectors

Use the awesome #160942 FLX-10 3S802 Flux ESC with XT-60 for complete control and versatility!

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when underwater. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts. 

Se produkt