PN Racing  |  Varenummer: MR2295LS

PN Racing Mini-Z V2/V3 94-98 Mount Long Damper Arm (Silver)

139,00 kr

Få prismatch på PN Racing Mini-Z V2/V3 94-98 Mount Long Damper Arm (Silver)

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil før kl. 12:00, leveret om 6-8 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Description

Long Damper Arm Design for MR2295 V2/V3 94-98mm Motor Mount ONLY For new (TDS) Tri-Damper System use V2/V3 Version change the design of the damper arm, and the side support stronger. Short 94mm wheelbase motor mount for quick handling. Can be configured for 98mm or 102mm wheelbase. ?Ultra compact motor mount design. Motor positioned 3 mm lower than typical 94mm motor mount. Motor CG location is now comparable to the longer 98mm motor mount. ?Open design provide clearance for motor replacement. Wheel removal not required for motor change. ?Use of larger gears will not increase motor CG height since motor plate slides horizontally during gear adjustment. ?Low profile damper post arm. Gives more room for up or down damper post adjustment to optimize handling. ?4 position axel height adjustment. ?Minimum weight design.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

PN Racing

PN Racing Mini-Z V2/V3 94-98 Mount Long Damper Arm (Silver)

139,00 kr

Description

Long Damper Arm Design for MR2295 V2/V3 94-98mm Motor Mount ONLY For new (TDS) Tri-Damper System use V2/V3 Version change the design of the damper arm, and the side support stronger. Short 94mm wheelbase motor mount for quick handling. Can be configured for 98mm or 102mm wheelbase. ?Ultra compact motor mount design. Motor positioned 3 mm lower than typical 94mm motor mount. Motor CG location is now comparable to the longer 98mm motor mount. ?Open design provide clearance for motor replacement. Wheel removal not required for motor change. ?Use of larger gears will not increase motor CG height since motor plate slides horizontally during gear adjustment. ?Low profile damper post arm. Gives more room for up or down damper post adjustment to optimize handling. ?4 position axel height adjustment. ?Minimum weight design.

Se produkt
Tilbage til toppen