1 2
TAMIYA  |  Varenummer: TA-86050 Producent varenr.: 86050

PS-50 Sparkling Pink Alumite

109,00 kr

Få prismatch på PS-50 Sparkling Pink Alumite

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så vender vi hurtigst muligt tilbage. Læs betingelserne her.

Lagerstatus:

På lager - bestil før kl. 15:00, leveret d. 01 aug. (2 dage)

Afhentning:

På lager - Butik

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fri fragt ved 600 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

PS – til fjernstyrede biler: Tamiya-lakspray til gennemsigtige Lexan-karrosserier. Males indvendigt. Ikke til plastikmodeller.

Tamiya Polycarbonate Spray

These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.

Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.

Warning: Never use these paints on plastic models.

Forsendelse

Vi benytter GLS:

Pakkeshop: 39 kr.
Direkte til adresse: 59 kr.
Erhverv: 59 kr.

TAMIYA

PS-50 Sparkling Pink Alumite

109,00 kr
PS – til fjernstyrede biler: Tamiya-lakspray til gennemsigtige Lexan-karrosserier. Males indvendigt. Ikke til plastikmodeller.

Tamiya Polycarbonate Spray

These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model.

Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies.

Warning: Never use these paints on plastic models.

Se produkt
Tilbage til toppen