Reflex Racing  |  Varenummer: RX28A-20

Reflex Racing RX28A-20 - RX28 Option Hard Steel Chassis Plate Kit - 30+5g

519,00 kr

Få prismatch på Reflex Racing RX28A-20 - RX28 Option Hard Steel Chassis Plate Kit - 30+5g

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 5-7 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Description
This option chassis is designed to make your RX28 easier to drive in high bite conditions. The chassis is made from hard coated stainless steel and has only a small front cut for a lot less flex and more than anything fore and aft rigidity. The new shape also shifts the weight bias slightly forward and this aids the car to be smoother and easier to drive. Additionally the chassis pivot has been lowered so that there is more forward bite and less traction rolling from the rear end.

Included with this chassis kit is a 5g tungsten weight (to be installed with tire tape or servo tape) that fits around and behind the servo to lower the CG even further and help bring your car up to minimum weight when running lexan classes as well as making it easier to drive in faster categories.

Lastly, the chassis uses the RX28SE Steering Bridge as this allows for more space for electronics. The geometry is still the same, but this allows for a little more electronics configurations.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

Reflex Racing

Reflex Racing RX28A-20 - RX28 Option Hard Steel Chassis Plate Kit - 30+5g

519,00 kr

Description
This option chassis is designed to make your RX28 easier to drive in high bite conditions. The chassis is made from hard coated stainless steel and has only a small front cut for a lot less flex and more than anything fore and aft rigidity. The new shape also shifts the weight bias slightly forward and this aids the car to be smoother and easier to drive. Additionally the chassis pivot has been lowered so that there is more forward bite and less traction rolling from the rear end.

Included with this chassis kit is a 5g tungsten weight (to be installed with tire tape or servo tape) that fits around and behind the servo to lower the CG even further and help bring your car up to minimum weight when running lexan classes as well as making it easier to drive in faster categories.

Lastly, the chassis uses the RX28SE Steering Bridge as this allows for more space for electronics. The geometry is still the same, but this allows for a little more electronics configurations.

Se produkt
Tilbage til toppen