Reflex Racing  |  Varenummer: RX516V2

Reflex Racing RX516V2 - Titanium Reverse Thread Adjustable Front Axles

169,00 kr

Få prismatch på Reflex Racing RX516V2 - Titanium Reverse Thread Adjustable Front Axles

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil før kl. 12:00, leveret om 5-7 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Description

This is the V2 of our reverse axles. Now made from Titamium for more durability. The V2 axles allow you to adjust your font offset 1mm of trackwidth in increments of 0.5mm though the included M3x0.5mm Axle Shims.

Reverse thread axles compatible with your Reflex Racing RX28 and GL/Atomic cars. By reversing the thread and using a screw instead of a nut, the front end of your car is less likely to snag into the RCP rails when running lower offset wheels. The kit comes with 2 Axles, 4pcs of M3x0.5 Copper Shims and 2pcs of M2x4mm button head screws.

Tip: Depending on the type of wheel you use, sometimes, the axles can have a little bit of axial side to side play (minimal). You can tighten this up by lightly sanding the outer axle to make is slightly narrower.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

Reflex Racing

Reflex Racing RX516V2 - Titanium Reverse Thread Adjustable Front Axles

169,00 kr

Description

This is the V2 of our reverse axles. Now made from Titamium for more durability. The V2 axles allow you to adjust your font offset 1mm of trackwidth in increments of 0.5mm though the included M3x0.5mm Axle Shims.

Reverse thread axles compatible with your Reflex Racing RX28 and GL/Atomic cars. By reversing the thread and using a screw instead of a nut, the front end of your car is less likely to snag into the RCP rails when running lower offset wheels. The kit comes with 2 Axles, 4pcs of M3x0.5 Copper Shims and 2pcs of M2x4mm button head screws.

Tip: Depending on the type of wheel you use, sometimes, the axles can have a little bit of axial side to side play (minimal). You can tighten this up by lightly sanding the outer axle to make is slightly narrower.

Se produkt
Tilbage til toppen