Team Losi Racing  |  Varenummer: TLR332083 Producent varenr.: TLR332083  |  EAN: 605482671368

Ring and Pinion, Composite(Center Diff Only):22X-4

75,00 kr 79,00 kr

Få prismatch på Ring and Pinion, Composite(Center Diff Only):22X-4

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 6-9 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Features

  • Molded from specially formulation high impact composite, these gears are highly durable
  • Composite Ring and Pinion sets are 11g lighter than the stock versions, so 22g if replacing front and rear ring and pinions
  • With 22g removed from the drivetrain, the chassis will stay flatter and carry more corner speed with the lighter gears
  • Note – Run with center differential only. If run with a slipper, the gears will likely fail
  • Note – Requires use of M2.5 x 10mm flat head screws (included) rather than the kit M2.5 x 8mm flat head screws
  • Note – Requires use of two 10x14x0.1mm shims between the gear and bearing on the gear side (included)

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

Team Losi Racing

Ring and Pinion, Composite(Center Diff Only):22X-4

75,00 kr 79,00 kr

Features

  • Molded from specially formulation high impact composite, these gears are highly durable
  • Composite Ring and Pinion sets are 11g lighter than the stock versions, so 22g if replacing front and rear ring and pinions
  • With 22g removed from the drivetrain, the chassis will stay flatter and carry more corner speed with the lighter gears
  • Note – Run with center differential only. If run with a slipper, the gears will likely fail
  • Note – Requires use of M2.5 x 10mm flat head screws (included) rather than the kit M2.5 x 8mm flat head screws
  • Note – Requires use of two 10x14x0.1mm shims between the gear and bearing on the gear side (included)
Se produkt
Tilbage til toppen