RPM  |  Varenummer: RPM80412 EAN: 80343118

RPM Pinion Case - Black - 80412

89,00 kr

Få prismatch på RPM Pinion Case - Black - 80412

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

Der er 2 styk på lager - bestil nu, leveret d. 16 sep. (1 dag)

Afhentning:

Der er 2 styk på lager - Nørresundby

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

RPM Pinion Protector Case


RPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a peel-off decal sheet with two pinion-to-spur gear ratio charts for both 48 and 64 pitch gears. The appropriate chart can be placed in the recessed area on the bottom of the case. Also on the decal sheet is a set of numbered squares from 14 to 31 (gear teeth), which can be adhered to the inside of the case. There are ten blank squares so you can write in your own numbers if needed. RPM Pinion Cases are available in translucent blue or black and holds as many as 15 pinion gears.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

RPM

RPM Pinion Case - Black - 80412

89,00 kr

RPM Pinion Protector Case


RPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a peel-off decal sheet with two pinion-to-spur gear ratio charts for both 48 and 64 pitch gears. The appropriate chart can be placed in the recessed area on the bottom of the case. Also on the decal sheet is a set of numbered squares from 14 to 31 (gear teeth), which can be adhered to the inside of the case. There are ten blank squares so you can write in your own numbers if needed. RPM Pinion Cases are available in translucent blue or black and holds as many as 15 pinion gears.
Se produkt
Tilbage til toppen