RPM  |  Varenummer: RPM81722 Producent varenr.: 81722

Suspension Arms Rear Lower (Pair) ARRMA 6S

125,00 kr

Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 3-4 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering

  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fri fragt ved 600 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
    Se butiksoplysninger

Beskrivelse

RPM 81722 - Rear A-arms for the ARRMA 6S (V5 & EXB) line of Vehicles

RPM Rear A-arms for 6S V5 / EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam & Outcast are an all new design. The design modifications accommodate changes made by ARRMA for V5 and EXB versions of these vehicles, although they are reverse compatible for older models (see “Version Notes”).

Our A-arms are significantly beefier than our original 6S version A-arms. Support beams are 30% thicker, improving durability and strength while reducing flex. Less flex equates to more predictable suspension performance and handling. We also added a second shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.

RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Notorious, Fireteam & Outcast A-arms are sold as a pair (1 – left & 1 – right) in each package. Our A-arms replace ARRMA #ARA330654.

Version Notes:
V5 & EXB models: Stock replacement A-arms for ARRMA #ARA330654. Inner shock mount and inner sway bar holes are stock geometry. Do not use outer shock mount and outer sway bar holes for V5 / EXB models.
V4 and earlier models: Stock replacement A-arms for ARRMA #AR330249. Outer shock mount and outer sway bar holes are stock geometry. Do not use inner shock mount and inner sway bar holes for V4 or older models unless converting to V5 / EXB suspension components.

Forsendelse

Vi benytter GLS.
Her er der følgende muligheder:

  • Levering til pakkeshop, fast rate uanset vægt og beløb: 29 kr.
  • Levering direkte til kundens adresse: 0-5 kg: 69 kr, 5-99 kg: 89 kr.

Leveringstid: 1-2 dage.
Der afsendes på bestillingsdagen frem til 15.00. Leveringstiden er gældende for både privat- og erhvervsadresser.

RPM

Suspension Arms Rear Lower (Pair) ARRMA 6S

125,00 kr

RPM 81722 - Rear A-arms for the ARRMA 6S (V5 & EXB) line of Vehicles

RPM Rear A-arms for 6S V5 / EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam & Outcast are an all new design. The design modifications accommodate changes made by ARRMA for V5 and EXB versions of these vehicles, although they are reverse compatible for older models (see “Version Notes”).

Our A-arms are significantly beefier than our original 6S version A-arms. Support beams are 30% thicker, improving durability and strength while reducing flex. Less flex equates to more predictable suspension performance and handling. We also added a second shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.

RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Notorious, Fireteam & Outcast A-arms are sold as a pair (1 – left & 1 – right) in each package. Our A-arms replace ARRMA #ARA330654.

Version Notes:
V5 & EXB models: Stock replacement A-arms for ARRMA #ARA330654. Inner shock mount and inner sway bar holes are stock geometry. Do not use outer shock mount and outer sway bar holes for V5 / EXB models.
V4 and earlier models: Stock replacement A-arms for ARRMA #AR330249. Outer shock mount and outer sway bar holes are stock geometry. Do not use inner shock mount and inner sway bar holes for V4 or older models unless converting to V5 / EXB suspension components.
Se produkt