FUTABA  |  Varenummer: FPSBS-01V Producent varenr.: 05102582-1

SBS-01V Voltage Telemetry Sensor (0-100V) S.BUS2

387,04 kr

Lagerstatus:

Ikke på lager

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fri fragt ved 600 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

This SBS-01V Voltage Sensor is used in conjunction with a telemetry enabled transmitter/receiver, is used to indicate the voltage of the item to which it is attached.

Although the telemetry receiver of Futaba's has a function which measures voltage, if SBS-01V is used, it can measure more battery voltage. To maximize your enjoyment, and to ensure proper sensing, please read through this manual thoroughly.

SBS-01V measures two voltage. One corresponds to high voltages, such as a drive battery, with an EXT line. However, processing shown in the next is required. Another is a normal line and is measurement of the battery for receivers of a line connected to 3P connector, or the battery for servos.

  • Use : Voltage sensor
  • Range [EXT line Voltage] 0.0 - 100.0V
  • Range [Normal line Voltage] 3.5V - 8.4V (It measures to the first decimal place)
  • Length: 870 mm
  • Weight: 6.0 g
  • Voltage: DC 3.7-7.4V

Forsendelse

Vi benytter GLS.
Her er der følgende muligheder:

  • Levering til pakkeshop, fast rate uanset vægt og beløb: 29 kr.
  • Levering direkte til kundens adresse: 0-5 kg: 69 kr, 5-99 kg: 89 kr.

Leveringstid: 1-2 dage.
Der afsendes på bestillingsdagen frem til 15.00. Leveringstiden er gældende for både privat- og erhvervsadresser.

FUTABA

SBS-01V Voltage Telemetry Sensor (0-100V) S.BUS2

387,04 kr
This SBS-01V Voltage Sensor is used in conjunction with a telemetry enabled transmitter/receiver, is used to indicate the voltage of the item to which it is attached.

Although the telemetry receiver of Futaba's has a function which measures voltage, if SBS-01V is used, it can measure more battery voltage. To maximize your enjoyment, and to ensure proper sensing, please read through this manual thoroughly.

SBS-01V measures two voltage. One corresponds to high voltages, such as a drive battery, with an EXT line. However, processing shown in the next is required. Another is a normal line and is measurement of the battery for receivers of a line connected to 3P connector, or the battery for servos.

  • Use : Voltage sensor
  • Range [EXT line Voltage] 0.0 - 100.0V
  • Range [Normal line Voltage] 3.5V - 8.4V (It measures to the first decimal place)
  • Length: 870 mm
  • Weight: 6.0 g
  • Voltage: DC 3.7-7.4V
Se produkt
Tilbage til toppen