X-Power  |  Varenummer: XP-PGM-P1

Xpower Program card for X-Power ESC(RJ-28-30A)

219,00 kr

Få prismatch på Xpower Program card for X-Power ESC(RJ-28-30A)

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

Ikke på lager

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Description

Setting of ESC
1.With the ESC off,un-plug the sensor wire from the motor and plug it into the sensor port on the Programmer.The sensor wire extension included with your ESC makes working with shorter sensor wires more convenient.
2.Turn the ESC ON
3.Select ESC Settings->OK
4.Select press the ESC power button
5.Press the enter button when the Program show X-Power RC Mini-X ESC V3.0
6.Choose Change Settings and you will now be able to view and /or modify your current selections.If you do not make any changes,you can unplug the Programmer at any time,reinstall the motor sensor wire,and use your ESC.If you have made changes,return to the previous menu and select SAVE Profile.
7.Choose the profile number where the setting will be saved->OK
8.Once your settings have been saved,unplug the Programmer,reinstall the motor sensor wire,and your ESC is ready to use.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

X-Power

Xpower Program card for X-Power ESC(RJ-28-30A)

219,00 kr

Description

Setting of ESC
1.With the ESC off,un-plug the sensor wire from the motor and plug it into the sensor port on the Programmer.The sensor wire extension included with your ESC makes working with shorter sensor wires more convenient.
2.Turn the ESC ON
3.Select ESC Settings->OK
4.Select press the ESC power button
5.Press the enter button when the Program show X-Power RC Mini-X ESC V3.0
6.Choose Change Settings and you will now be able to view and /or modify your current selections.If you do not make any changes,you can unplug the Programmer at any time,reinstall the motor sensor wire,and use your ESC.If you have made changes,return to the previous menu and select SAVE Profile.
7.Choose the profile number where the setting will be saved->OK
8.Once your settings have been saved,unplug the Programmer,reinstall the motor sensor wire,and your ESC is ready to use.
Se produkt
Tilbage til toppen