Z-Performance  |  Varenummer: ZP04

Z-Performance ZP04 - Mini-Z Mercedes Sauber C9 Rear Wing Set

319,00 kr

Få prismatch på Z-Performance ZP04 - Mini-Z Mercedes Sauber C9 Rear Wing Set

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 5-7 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Description

Suber C9 Rear Wing Set Assembly Guide:

Deburr with cutter knife if needed.
Tighten Screws Slowly! Use the black screws to build the wing.
Take double sided adhesive tape to fix the wing to the body.
Align the wing at the body into right position,
Then drill two holes with 1.8mm drill bit into the back fenders.
Use the silver screw to fix the wing complete to the body.
Use sandpaper to sand the inside of the back fenders. Clean up with alcohol,
Glue carbon stability plates in with super glue.
Get more stiffness to the back fenders.

All set-parts are paintable.

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

Z-Performance

Z-Performance ZP04 - Mini-Z Mercedes Sauber C9 Rear Wing Set

319,00 kr
Description

Suber C9 Rear Wing Set Assembly Guide:

Deburr with cutter knife if needed.
Tighten Screws Slowly! Use the black screws to build the wing.
Take double sided adhesive tape to fix the wing to the body.
Align the wing at the body into right position,
Then drill two holes with 1.8mm drill bit into the back fenders.
Use the silver screw to fix the wing complete to the body.
Use sandpaper to sand the inside of the back fenders. Clean up with alcohol,
Glue carbon stability plates in with super glue.
Get more stiffness to the back fenders.

All set-parts are paintable.

Se produkt
Tilbage til toppen