Z-Performance  |  Varenummer: ZP05

Z-Performance ZP05 - Mini-Z F1 Formula 1 Rear Wing Set

239,00 kr

Lagerstatus:

På lager hos leverandør - bestil før kl. 12:00, leveret om 5-7 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fri fragt ved 600 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Description

Kyosho F1 Rear Wing Set Assembly Guide:

Deburr with cutter knife if needed.
Upper wing hole size is 1.8mm! Use M2x6 mm screws from set
Tighten screws slowly!
For setting the wing to chassis, use original screws from kyosho or screws from optional motor mounts!
Parts are paintable

2 different ground holders the higher one is for use at original motor mount
the deeper one is for every optional motor mount (PN, Atomic,...)
2 upper wings, one is 60 degree ending, one is 75 degree ending!

Forsendelse

Vi benytter GLS:

Pakkeshop: 39 kr.
Direkte til adresse: 59 kr.
Erhverv: 59 kr.

Z-Performance

Z-Performance ZP05 - Mini-Z F1 Formula 1 Rear Wing Set

239,00 kr
Description

Kyosho F1 Rear Wing Set Assembly Guide:

Deburr with cutter knife if needed.
Upper wing hole size is 1.8mm! Use M2x6 mm screws from set
Tighten screws slowly!
For setting the wing to chassis, use original screws from kyosho or screws from optional motor mounts!
Parts are paintable

2 different ground holders the higher one is for use at original motor mount
the deeper one is for every optional motor mount (PN, Atomic,...)
2 upper wings, one is 60 degree ending, one is 75 degree ending!

Se produkt
Tilbage til toppen