Pro Boat  |  Varenummer: PRM159125

1/10 Venturi GT Clear Body for 190mm TC

321,00 kr 335,00 kr

Lagerstatus:

På lager hos leverandør - bestil før kl. 14:00, leveret om 6-9 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering

  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fri fragt ved 600 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
    Se butiksoplysninger

Beskrivelse

Overview

Introducing the PROTOform Venturi GT, a new contender in the popular USGT class that combines scale looks with all-out performance on the track.

Venturi GT takes inspiration from a new wave of hypercars, featuring a low-CG, cab-forward design sure to provide exceptional handling characteristics while also looking stunning on the track. The super low-slung hood and raised wheel arches give the Venturi an aggressive GT-style aesthetic, while the deeply sculpted side panels provide superior side bite and overall body rigidity. The rear wing features two trim lines: a lower 10mm tall line for USGT-sanctioned racing, and a taller cut line for no-holds-barred club racing where extra rear downforce is needed.

Fully approved for competition by USGT rules, Venturi GT is produced in high-quality clear polycarbonate, coming in at around 85-90g race-ready weight. A comprehensive decal sheet including windshield headers and number plates, wing mounting hardware, and paint-then-peel overspray film are all included as always.

This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.

PRM159125 | Venturi GT Clear Body for 190mm TC

 

Features

  • Perfectly Suited for USGT Class
  • Exceptional Scale Detail
  • Low-CG, Cab-Forward Styling
  • Deeply Sculpted Side Panels
  • Paint-then-peel Overspray Film Built-in
  • Made with Crystal Clear Polycarbonate
  • Made in the USA, since 1982

Four Steps to Race Ready

  1. Clean Body and apply included window mask
  2. Paint then peel the over-spray film off
  3. Sticker your body (decal sheet included)
  4. Mount your new body onto your Touring Car

Fits

  • 190mm Touring Cars

Specs

Length:
16.9" (430 mm)
Width:
7.5" (191 mm)
Wheelbase:
10.16" (258 mm)

Forsendelse

Vi benytter GLS.
Her er der følgende muligheder:

  • Levering til pakkeshop, fast rate uanset vægt og beløb: 29 kr.
  • Levering direkte til kundens adresse: 0-5 kg: 69 kr, 5-99 kg: 89 kr.

Leveringstid: 1-2 dage.
Der afsendes på bestillingsdagen frem til 15.00. Leveringstiden er gældende for både privat- og erhvervsadresser.

Pro Boat

1/10 Venturi GT Clear Body for 190mm TC

321,00 kr 335,00 kr

Overview

Introducing the PROTOform Venturi GT, a new contender in the popular USGT class that combines scale looks with all-out performance on the track.

Venturi GT takes inspiration from a new wave of hypercars, featuring a low-CG, cab-forward design sure to provide exceptional handling characteristics while also looking stunning on the track. The super low-slung hood and raised wheel arches give the Venturi an aggressive GT-style aesthetic, while the deeply sculpted side panels provide superior side bite and overall body rigidity. The rear wing features two trim lines: a lower 10mm tall line for USGT-sanctioned racing, and a taller cut line for no-holds-barred club racing where extra rear downforce is needed.

Fully approved for competition by USGT rules, Venturi GT is produced in high-quality clear polycarbonate, coming in at around 85-90g race-ready weight. A comprehensive decal sheet including windshield headers and number plates, wing mounting hardware, and paint-then-peel overspray film are all included as always.

This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.

PRM159125 | Venturi GT Clear Body for 190mm TC

 

Features

  • Perfectly Suited for USGT Class
  • Exceptional Scale Detail
  • Low-CG, Cab-Forward Styling
  • Deeply Sculpted Side Panels
  • Paint-then-peel Overspray Film Built-in
  • Made with Crystal Clear Polycarbonate
  • Made in the USA, since 1982

Four Steps to Race Ready

  1. Clean Body and apply included window mask
  2. Paint then peel the over-spray film off
  3. Sticker your body (decal sheet included)
  4. Mount your new body onto your Touring Car

Fits

  • 190mm Touring Cars

Specs

Length:
16.9" (430 mm)
Width:
7.5" (191 mm)
Wheelbase:
10.16" (258 mm)
Se produkt