Hobbynox  |  Varenummer: HN013-01 EAN: 67344206

Air-Regulator wih Manometer & Air Filter G18 & G14

99,00 kr

Få prismatch på Air-Regulator wih Manometer & Air Filter G18 & G14

Har du fundet varen billigere hos en anden forhandler? Indsæt linket herunder, så får du hurtigt svar på, om vi kan matche prisen. Vi kigger på totalprisen — altså inkl. fragt, told og gebyrer — og varen skal helst være på lager hos dem. Vi matcher, hvis vi kan. Læs betingelserne her.

Lagerstatus:

På lager hos leverandør - bestil nu, leveret om 5-7 dage

Afhentning:

Ikke på lager

På lager? Så afsender vi om:

Dag-til-dag levering

Dag-til-dag levering
  • Dankort
  • MobilePay
  • Visa
  • Mastercard
  • EAN betaling
  • Levering 1–2 hverdage
  • Fragt fra 35 kr.
  • E-mærket webshop
  • Nem og sikker betaling
  • Kan bestilles til eller afhentes i Nørresundby
     Se butiksoplysninger

Beskrivelse

Airbrush and airbrush compressor air regulator with built-in air-filter and air-pressure manometer. This can be used as an spare part for our airbrush compressors and also used separately together with our airbrush holder.

When used with our airbrush holder (HN017-00) you can easily have access to adjusting the air pressure and the set air-pressure value will also be more visible at your work bench where you have the holder attached. One extra braided airbrush hose is needed between the compressor and the air regulator.

  • 1x G1/8 BSP male adapter
  • 1x G1/4 BSP male adapter
  • Note, PTFE thread-tape (or a thread sealing liquid) is needed to seal the threads

Forsendelse

Vi benytter GLS:

Pakkeshop: fra 35 kr.
Direkte til adresse: fra 59 kr.
Erhverv: fra 49 kr.

Hobbynox

Air-Regulator wih Manometer & Air Filter G18 & G14

99,00 kr
Airbrush and airbrush compressor air regulator with built-in air-filter and air-pressure manometer. This can be used as an spare part for our airbrush compressors and also used separately together with our airbrush holder.

When used with our airbrush holder (HN017-00) you can easily have access to adjusting the air pressure and the set air-pressure value will also be more visible at your work bench where you have the holder attached. One extra braided airbrush hose is needed between the compressor and the air regulator.

  • 1x G1/8 BSP male adapter
  • 1x G1/4 BSP male adapter
  • Note, PTFE thread-tape (or a thread sealing liquid) is needed to seal the threads
Se produkt
Tilbage til toppen